Home
Drawings
Data
>>Images
Publications
Contact
|
2Jun06
IMG_0582.JPG Router in action on full-sized PS1 illuminator panel.
IMG_0583.JPG Similar.
IMG_0584.JPG Similar, no flash.
IMG_0585.JPG Similar, no flash.
IMG_0586.JPG Router in action, closeup.
IMG_0587.JPG Similar. Router in action, closeup, with flash.
IMG_0588.JPG Closeup of finished grooves showing melted and spalled surface.
IMG_0589.JPG Similar, slightly closer.
IMG_0590.JPG Router in action, closeup, no flash, blurred.
IMG_0591.JPG Router in action, closeup, flash.
1Jun06
IMG_0576.JPG Full-sized PS1 illuminator panel set up on x-y table.
IMG_0577.JPG Similar, no flash.
IMG_0578.JPG Struts with mirrors attached.
IMG_0579.JPG Similar with flash.
IMG_0580.JPG Similar. Struts with milled relief.
IMG_0581.JPG Strut with milled relief closeup. Small amount of motion blurring.
21Feb06
IMG_0405.JPG Surface illuminance test setup.
IMG_0406.JPG Similar
IMG_0407.JPG Laser pointer with fiber coupler.
IMG_0408.JPG Test Panel with full-size diffuser panel spaced 3 inches.
IMG_0409.JPG Similar. Some motion blurring.
IMG_0410.JPG Panel edge showing edge of diffuser. Small amount of motion blurring.
IMG_0411.JPG Similar. Sharper.
IMG_0412.JPG Glowing Spool.
20Feb06
IMG_0394.JPG Test Panel with fiber installed. Note test abraded surface.
IMG_0395.JPG Similar
IMG_0396.JPG Similar
IMG_0397.JPG Test Panel with green excitation
IMG_0398.JPG Full view of test panel. Note spool of fiber.
IMG_0399.JPG Similar. Motion blurring.
IMG_0400.JPG Detail of panel edge.
IMG_0401.JPG Test panel with diffusing square approximately 3 inches above.
IMG_0402.JPG Similar. Longer shot and some motion blurring.
IMG_0403.JPG Similar. Closer shot.
IMG_0404.JPG Glowing spool of Eska fiber.
16Feb06
16Feb001.jpg Router in action on 24-inch prototype.
16Feb002.jpg Router closeup. Grooves visible.
16Feb003.jpg Router closeup. Motion blurring.
16Feb004.jpg Router head closeup.
16Feb005.jpg Router in action on 24-inch prototype. Closer and higher angle than 1.
16Feb006.jpg Router in action on 24-inch prototype. Long view showing surface plate.
16Feb007.jpg Completed grooved panel.
14Feb06
IMG_0382.JPG Aluminum honeycomb structural panel
IMG_0383.JPG Mirror finish acrylic panel
IMG_0384.JPG Components for 24-inch prototype
IMG_0385.JPG Diffusion finish acrylic panel
IMG_0386.JPG Test panel with routed channels
IMG_0387.JPG Test panel with fiber set in channel.
IMG_0388.JPG Router and new bracketry on x-y stage
IMG_0389.JPG Router and x-y stage with granite surface plate
IMG_0390.JPG Granite surface plate and x-y stage
IMG_0391.JPG Integrating optical pickoff and spectrometer
IMG_0392.JPG Optical pickoff side view
IMG_0393.JPG Optical pickoff closeup
|
